Oki B8300 Manual do Utilizador descarregar pdf (Página 86)

Saddle stitch finisher — 85

Misfeed in the saddle stitch finisher

When a misfeed occurs in the saddle stitch

finisher, remove the misfed paper following the

procedure below.

1. Unlatch the saddle stitch finisher and

slide it away from the printer.

2. Remove the misfed paper from the main

unit. After removing the misfed paper,

open and close the duplex module to

reset the jam indicator..

3. If misfed paper is not found in step 1,

open the top cover.

4. While pulling and turning roller rotating

knob B, remove the misfed paper. If the

misfed paper is released by turning roller

rotating knob B, remove it taking care not

to tear the paper.

5. Close the front cover.

6. If saddle stitch was selected, open the

front cover.

7. Remove the misfed paper from the stapler

compiler. Be careful not to tear the misfed

paper during removal.

8. Open the saddle stitch section cover.

9. Remove the misfed paper.Be careful not

to tear the misfed paper during removal.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 94 95

Sem comentários

Oki B8300 Manual do Utilizador Página 86