Oki 6120E Manual do Utilizador descarregar pdf (Página 167)

IV - 73

Section 4 - Appendix B - Application Considerations

OKI OkiLAN 6120e User’s Guide

TCP/IP

Configuring SCO UNIX for Printing

with the OkiLAN 6120e

This application note describes the configuration of the

printing system on the Santa Cruz Operation’s (SCO)

version of the UNIX operating system. For clarity and

brevity, the following specific names will be used to

represent general devices or concepts.

• lj4 - The local queue name of the SCO system to

which print jobs that are destined for a printer

attached to the OkiLAN 6120e will be directed.

• OKIPRINTER - The host name of the remote

system which is the OkiLAN 6120e. For example,

to telnet to the OkiLAN 6120e and invoke the

OkiLAN 6120e Configuration utility, you would

type telnet OKIPRINTER. A host name is not

required for the OkiLAN 6120e, the IP address

may be used.

• yourqueuename - This is the name of the queue

on the OkiLAN 6120e and must end with 1, 2, 3

or 4 depending on the port selected to service the

print jobs.

If FF, LF or NF are the last two letters of the

queue name, the job will be converted

accordingly. See pages IV-15 and IV-16 for more

information on remote queue names.

Prerequisites

Before you proceed, verify that the following

prerequisites are met:

1. SCO TCP/IP version 1.2 or later must be installed.

2. The name of the OkiLAN 6120e (OKIPRINTER)

and the IP address you wish to assign are in the

“/etc/hosts” file of the SCO machine.

3. The IP address of the OkiLAN 6120e has been

assigned and you are able to telnet to OKIPRINTER

successfully.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 221 222

Sem comentários

Oki 6120E Manual do Utilizador Página 167